Bioremediation - Oil Spill Cleanup -
EC-2100P is a natural product formulated for use in
hydrocarbon bioremediation - oil spill cleanup. It is environmentally safe and
effective in cleaning up soils
contaminated with petroleum hydrocarbons
and other contaminants including gasoline, diesel, crude
oil, benzene, toluene, ethyl benzene, xylene. etc.
Deep Cleans Soils
Lowers Disposal Costs
Form: Free-flowing granular powder
Nutrient Content: Biological nutrients & stimulants
Plate Count: 5 x 109
pH: 6.5 – 7.5
Bulk Density: 0.6 - 0.8 gr/cc
Water Solubility: Moderate - disperses in water
Flash Point: N/A
Sensitive to static discharge: Not sensitive
Stability: Max loss 1 log/yr
TYPICAL REMEDIATION PROTOCOL
There is not a standard protocol for bio-remediating
contaminated soils. There are however several guidelines
which should be followed.
Step 1. Till or rake the soil to optimize oxygen transfer.
Step 2. Apply
EC-4000 Micronutrient / Bio-Stimulant to oxidize the
affected soil and stimulate indigenous microbes.
Apply EC-2100P and rake or till the soil at seven to ten
day intervals or as required to ensure essential intimate
contact between the microbial cultures and the contaminates.
can be carried out with the aid any appropriate fertilizer
or seed spreading equipment. Dry or wet application can be
LABEL FOR SPECIFIC APPLICATION PROTOCOLS
The degradation process is directly affected by soil pH,
nutrient levels, oxygen availability, soil type,
environmental conditions (humidity, temperature, rainfall
amounts), indigenous biomass, degree of
contamination and the concentration of contaminates.
Accordingly, application rates and intervals will vary from
site to site. Repeated
applications may be needed for heavily contaminated soil.
TYPICAL APPLICATION RATES - INSITU BIOREMEDIATION
|| 12 to
20 oz./ 100 sq. feet
|| 1 gal.
/ 100 sq. feet
Spills up to 1 ft. deep
to 125 Lbs.
gal. / acre
Spills up to 18 in. deep
|| 125 to
200 Lbs / acre
gal. / acre
NOTE: In treatment environments with high biomass levels EC-2100P application rates can be reduced.
Typically the soil is placed in a lined containment cell in
lifts of 8 to 12 inches deep. EC-2100P & EC-4000 application
rates are the same as those for small spills.
This method is site specific and consultation with an
EcoChem technical representative or an experienced
contractor is recommended.
10 kg. (22.2 LB.) HDPE pail.
The materials used in the production of EC-2100P are derived
from naturally occurring and sustainable sources. EC-2100P
is non-caustic, non-corrosive, non-flammable and
environmentally safe. In addition, It is not harmful to
animals, plants and humans.
Fully complies with EPA Toxic Substance
Control Act (TSCA) and the rules, orders and regulations
promulgated there under including:
a) Sections 4, 5, 6 & 7; Title 40 Chapter 1, 707.20 thru
b) 40 CFR Sections 704.3. 710.2(e) and 720.3(c); and
c) Sections 5 and 13, reference 42FR64583
Does not contain marine pollutants as defined in 49 CFR
STORAGE & HANDLING
NOT FREEZE - Store in a cool dry location. (See MSDS)
Oil Spill Cleanup
IT MAKES NO SENSE TO USE CHEMICALS TO CLEAN UP