|
DEGREASER,
HYDROCARBON DEGRADER
CLEANS UP OIL SPILLS.
REMOVES OILS
STAINS FROM CONCRETE & ASPHALT DRIVEWAYS.
CLEANS UP OIL SPILLS IN SOIL, SAND & GRAVEL.
CLEANS UP OIL SPILLS ON HARD SURFACES.
REMOVES THOMPSON'S WATER SEAL
FROM MULTIPLE SURFACES
INCLUDING WOOD, BRICK, CONCRETE, MASONRY ETC.
EC-1800 degreaser is a natural,
eco friendly formulation for use in removing fresh and aged
oil stains, rust and other petroleum based products from
concrete,
asphalt, wood, metal, porcelain, plastics, gravel, soil, sand,
railroad ballast, textiles etc. EC-1800 is effective in cleaning and digesting oil spills
and stains containing gasoline, diesel, stove oil, crude oil, motor
oil, benzene, toluene, ethyl benzene glycol, xylene, etc.
EC-1800
contains beneficial microbes and a blend of surfactants,
rust inhibitors, and nutrients all selected for their
synergistic qualities and effectiveness in deep cleaning
surfaces contaminated with petroleum hydrocarbons etc.
EC-1800 does NOT contain acids, caustics, chemicals,
petroleum distillates or VOC’s and is D-Limonene free. In
addition, EC-1800 is environmentally friendly and leaves no
residue.
EC-1800
does not vaporize, it is not odorous and does not damage
human tissue. It is
biodegradable and is not DOT regulated. EC-1800 constituents
are not CERCLA hazardous (40 CFR 302.4), SARA toxic (40 CFR
372, subpart D) and unused EC-1800 would NOT be considered a
hazardous waste (40 CFR 261, subparts C, D, Appendix VIII).
| Form: |
Liquid -
Natural |
| Color: |
Blue |
| Nutrient
Content: |
Biological nutrients surfactants & stimulants |
| Specific
Gravity: |
1.0 |
| pH: |
6.5 - 7.5 when
diluted in water |
| Solubility: |
99.99 % in water |
EC-1800 IS SAFE FOR USE ON ANY SURFACE THAT IS COMPATIBLE
WITH WATER
BENEFITS
Biodegradable
Non Toxic - Non Hazardous
Does not produce fumes
Non Flammable
Non Combustible
Non Corrosive - Contains corrosion inhibitors
Does not contain VOC’s
Environmentally safe alternative to solvent based cleaners
Contains no
petroleum distillates
Phosphate
free
Non
abrasive
Deep cleans surfaces – Provides visible results in minutes
Fast drying.
D-Limonene
free
Leaves no residue
Enhances the natural degradation processes
Eliminates unsightly areas
Reduces potential liability
Lowers disposal costs
Certified for use in Southern California
Can be used in concentrated form or diluted form
TYPICAL APPLICATIONS
New and aged hydrocarbon spills
Oil field
equipment
Oil and oily
sludge dispersant
Railroad ballast
Locomotives
Liquid loading in gas wells
Floors, sidewalks, parking lots, storage
tanks, filling stations, docks, oil platforms etc.
Hydro electric transformers, sumps, machinery,
aircraft, rolling stock, etc.
Parts washers
Pressure washer
Ultrasonic cleaners
EC-1800 CAN BE APPLIED USING THE FOLLOWING TECHNIQUES
Spraying
Pouring
Circulation overflow
Pressure Washing
Ultrasonic Cleaning
Parts
Washer
Dipping
Soaking
Brushing
Sponging
Wiping
|
EC-1800
is highly efficient, has no
adverse affect on the environment and is not harmful to
animals, plants and humans.
|
|
TYPICAL APPLICATION PROTOCOL - HEAVY AGED
OIL STAINS
Step 1.
Apply concentrate to the affected area. Keep the surface wet
by applying a diluted solution of EC-1800 & water or
water alone while the product loosens deposits.
Step 2.
Allow sufficient time for the product to loosen or dissolve
deposits. For aged stains and rust, agitate using a fiber
pad or brush, to loosen deposits and speed removal.
Typically, the longer the contact time, the less agitation
will be required.
Step 3. Rinse with water. Where rinsing
is not possible, wipe the treated surface with wet cloth or
sponge.
NOTE:
Application can be carried out with the aid of a hand
sprayer, conventional sprayer, pressure washer etc.
Application rate, penetration
time and
retention time is
determined by type of surface, surface temperature and type
of contaminant. WARMER TEMPERATURES WILL REDUCE
CLEANING TIME |
|
TYPICAL APPLICATION PROTOCOL - GENERAL CLEANUP
EC-1800
is highly concentrated. Dilution rates are
determined by type of surface, surface temperature and type
of contaminant. EC-1800
may be used in concentrated form and at dilutions of up
to 1:100.
Application can be carried out with the aid of a hand sprayer,
conventional sprayer or pressure
washer.
Step 1. Dilute EC-1800 at the
appropriate rate and spray the affected area.
Step 2. Allow 5 to
10 minutes for the solution to penetrate the surface.
Step 3. Rinse with water.
EC-1800 can be diluted
for use in aqueous parts washers, ultrasonic cleaners and
pressure washers. Dilution rates may vary from 1:100 to
1:200 depending on application.
|
SAFETY
The materials used in the production of EC-1800 are derived
from naturally occurring and sustainable sources. EC-1800 is
non-caustic, non-corrosive, non-flammable and
environmentally safe. In addition, It is not harmful to
animals, plants and humans.
COMPLIANCE
Fully complies with EPA Toxic Substance Control Act (TSCA)
and the rules, orders and regulations promulgated there
under including:
a) Sections 4, 5, 6 & 7; Title 40 Chapter 1, 707.20 thru
707.75;
b) 40 CFR Sections 704.3. 710.2(e) and 720.3(c); and
c) Sections 5 and 13, reference 42FR64583
d) Does not contain marine
pollutants as defined in 49 CFR 171.8.
STORAGE &
HANDLING
DO NOT FREEZE! - Store in
a cool location. (SEE MSDS)
PACKAGING
1 Litre HDPE Jugs
4 Litre HDPE Jugs
20 Litre HDPE Pails
208 Litre HDPE Drums
Product: EC-1800
Product Code: 6618-01
Description: Natural
Degreaser / Hydrocarbon Degrader
Form: Liquid
Concentrate
|
|
|
.gif)
