Oil Spill Cleanup - Hydrocarbon
Bioremediation -
Insitu & Exsitu Soil Reclamation
EC-2100P is a natural product formulated for use in
hydrocarbon bioremediation. It is environmentally safe and
effective in cleaning up soils
contaminated with petroleum hydrocarbons
and other contaminants including gasoline, diesel, crude
oil, benzene, toluene, ethyl benzene, xylene. etc.
BENEFITS
•
Deep Cleans Soils
•
Enhances Natural
Processes
•
Eliminates Unsightly
Areas
•
Reduces Pollution
Liability
•
Lowers Disposal Costs
SPECIFICATIONS
Form: Free-flowing granular powder
Color: Beige
Nutrient Content: Biological nutrients & stimulants
Plate Count: 5 x 109
pH: 6.5 – 7.5
(re-hydrated state)
Bulk Density: 0.6 - 0.8 gr/cc
Water Solubility: Moderate - disperses in water
Flash Point: N/A
Sensitive to static discharge: Not sensitive
Stability: Max loss 1 log/yr
TYPICAL REMEDIATION PROTOCOL
There is not a standard protocol for bio-remediating
contaminated soils. There are however several guidelines
which should be followed.
Step 1. Till or rake the soil to optimize oxygen transfer.
Step 2. Apply
EC-4000 Micronutrient / Bio-Stimulant to oxidize the
affected soil and stimulate indigenous microbes.
Step 3.
Apply EC-2100P and rake or till the soil at seven to ten
day intervals or as required to ensure essential intimate
contact between the microbial cultures and the contaminates.
Application
can be carried out with the aid any appropriate fertilizer
or seed spreading equipment. Dry or wet application can be
used.
SEE PRODUCT
LABEL FOR SPECIFIC APPLICATION PROTOCOLS
NOTE:
The degradation process is directly affected by soil pH,
nutrient levels, oxygen availability, soil type,
environmental conditions (humidity, temperature, rainfall
amounts), indigenous biomass, degree of
contamination and the concentration of contaminates.
Accordingly, application rates and intervals will vary from
site to site. Repeated
applications may be needed for heavily contaminated soil.
TYPICAL APPLICATION RATES - INSITU BIOREMEDIATION
|
|
EC-2100P
|
EC-4000
Diluted Solution
|
| Small
Spills
|
12 to
20 oz./ 100 sq. feet
|
1 gal.
/ 100 sq. feet
|
| Large
Spills up to 1 ft. deep
|
100
to 125 Lbs.
/ acre
|
400
gal. / acre
|
| Large
Spills up to 18 in. deep
|
125 to
200 Lbs / acre
|
500
gal. / acre
|
NOTE: In treatment environments with high biomass levels EC-2100P application rates can be reduced.
EXCAVATED SOIL
Typically the soil is placed in a lined containment cell in
lifts of 8 to 12 inches deep. EC-2100P & EC-4000 application
rates are the same as those for small spills.
DIRECT INJECTION
This method is site specific and consultation with an
EcoChem technical representative or an experienced
contractor is recommended.
PACKAGING
10 kg. (22.2 LB.) HDPE pail.
SAFETY
The materials used in the production of EC-2100P are derived
from naturally occurring and sustainable sources. EC-2100P
is non-caustic, non-corrosive, non-flammable and
environmentally safe. In addition, It is not harmful to
animals, plants and humans.
COMPLIANCE
Fully complies with EPA Toxic Substance
Control Act (TSCA) and the rules, orders and regulations
promulgated there under including:
a) Sections 4, 5, 6 & 7; Title 40 Chapter 1, 707.20 thru
707.75;
b) 40 CFR Sections 704.3. 710.2(e) and 720.3(c); and
c) Sections 5 and 13, reference 42FR64583
d)
Does not contain marine pollutants as defined in 49 CFR
171.8.
STORAGE & HANDLING
DO
NOT FREEZE - Store in a cool dry location. (See MSDS)
|
OUR MAIN FOCUS IS ON
PROVIDING YOU WITH THE FINEST PRODUCTS BACKED BY SUPERIOR CUSTOMER SERVICE.
|
Product: EC-2100P
Product Code:
6621
Designation: Commercial /
Industrial
Application:
Oil Spill Cleanup
Packaging:
22 lb. HDPE Pails
Form:
Granular
.gif)
For
technical data or a personalized quote,
contact us at:
Tel:
1-403-364-2888 ........1-403-364-2802 ........
Toll Free
1-877-364-0888
(8 am-5 pm MST
Weekdays)
Fax: 1-403-364-2889
Email:
|
RESOURCES - Oil Spill Cleanup Info
|
IT MAKES NO SENSE TO USE CHEMICALS TO CLEAN UP
CHEMICALS
| | .gif){kind=small}
OIL
SPILL CLEANUP PRODUCTS
Insitu Soil Treatment
.gif){kind=small}
